# example Snort_inline configuration file
# Last modified 26 January, 2005
#
# Standard Snort configuration file modified for inline
# use.  Most preprocessors currently do not work in inline
# mode, as such they are not included.
#

### Network variables
#var HOME_NET 192.168.0.78/255.255.255.255
var HOME_NET [192.168.0.64/255.255.255.0,1.2.3.4]
var HONEYNET any
var EXTERNAL_NET !$HOME_NET
#var EXTERNAL_NET any
var SMTP_SERVERS $HOME_NET
var TELNET_SERVERS $HOME_NET
var HTTP_SERVERS $HOME_NET
var SQL_SERVERS $HOME_NET

# Ports you run web servers on
#
# Please note:  [80,8080] does not work.
# If you wish to define multiple HTTP ports,
# 
## var HTTP_PORTS 80 
## include somefile.rules 
## var HTTP_PORTS 8080
## include somefile.rules 
var HTTP_PORTS 80 3128 8080

# Ports you want to look for SHELLCODE on.
var SHELLCODE_PORTS !80

# Ports you do oracle attacks on
var ORACLE_PORTS 1521

### As of snort_inline 2.2.0 we drop 
### packets with bad checksums. We can 
config checksum_mode: all 

# Path to your rules files (this can be a relative path)
var RULE_PATH /etc/snort/rules
var BLEEDING_RULE_PATH /etc/snort/bleeding_rules

# Configure the snort decoder
# ============================
#
# Snort's decoder will alert on lots of things such as header
# truncation or options of unusual length or infrequently used tcp options
#
#
# Stop generic decode events:
#
# config disable_decode_alerts
#
# Stop generic decode drops:
#
# config disable_decode_drops
#
# Stop Alerts on experimental TCP options
#
# config disable_tcpopt_experimental_alerts
#
# Stop drops on experimental TCP options
#
# config disable_tcpopt_experimental_drops
#
# Stop Alerts on obsolete TCP options
#
# config disable_tcpopt_obsolete_alerts
#
# Stop drops on obsolete TCP options
#
# config disable_tcpopt_obsolete_drops
#
# Stop Alerts on T/TCP alerts
#
# In snort 2.0.1 and above, this only alerts when a TCP option is detected
# that shows T/TCP being actively used on the network.  If this is normal
# behavior for your network, disable the next option.
#
# config disable_tcpopt_ttcp_alerts
#
# Stop drops on T/TCP alerts
#
# config disable_ttcp_drops
#
# Stop Alerts on all other TCPOption type events:
#
# config disable_tcpopt_alerts
#
# Stop drops on all other TCPOption type events:
#
# config disable_tcpopt_drops
#
# Stop Alerts on invalid ip options
#
# config disable_ipopt_alerts
#
# Stop drops on invalid ip options
#
# config disable_ipopt_drops

# Configure the detection engine
# ===============================
#
# Use a different pattern matcher in case you have a machine with very limited
# resources:
#
# config detection: search-method lowmem

# Configure Inline Resets
# ========================
# 
# If running an iptables firewall with snort_inline we can now perform resets
# via a physical device we grab the indev from iptables and use this for the  
# interface on which to send resets. This config option takes an argument for
# the src mac address you want to use in the reset packet. This way the bridge 
# can remain stealthy. If the src mac option is not set we use the mac address  
# of the indev device. If we don't set this option we will default to sending 
# resets via raw socket, which needs an ipaddress to be assigned to the int.
#
# config layer2resets: 00:06:76:DD:5F:E3

### Preprocessors
# usage guidelines:  if the plugin normalizes the packet so that the
# detection engine can better interpret the data, the plugin can be
# used with the snort_inline safely.  If the plugin itself makes
# the alert decisions, then we have to modify it to drop packets.

# sticky-drop: drop all packets from the source of an attack for x number of seconds
# ----------------------------------------------------------------------------------
# For use in rule language and by the portscan2, clamav, and the sfportscan preprocessor to drop
# packets from attackers for x number of seconds because we don't like them messing with 
# our stuff. Right now we only drop from source so if using the sticky-drop keyword make sure 
# that the source of the attack is something you actually want to block. 
#
# In the example below the first line tells stickydrop a max amount of entries for memory allocation
# In addition the first line tells stickydrop to log droped packets to the snort log dir stickyd.log
#
# The second line specifies timeouts for the two currently supported portscan preprocs and clamav
#
# The third line tells which sources to never drop, it is very, very important to add your home net 
# and you dns servers to this list. 
#
#example:
#preprocessor stickydrop: max_entries 3000,log
#preprocessor stickydrop-timeouts: sfportscan 3000, portscan2 3000, clamav 3000
#preprocessor stickydrop-ignorehosts: 192.168.0.0/24 192.168.1.12 192.168.1.13 

# bait-and-switch: Attempt to do stealthy reroutes of an attacker to a honeypot for x number of seconds
# ----------------------------------------------------------------------------------
# For use in rule language 
# reroute packets from attackers for x number of seconds because we don't like them messing with
# our stuff. 
#
# In the example below the first line tells bait-and-switch a max amount of entries for memory allocation
# In addition the first line tells bait-and-switch to log droped packets to the snort log dir bands.log
#
#
# The second line tells which sources to never reroute it is very, very important to add your home net
# and you dns servers to this list.
#
#example:
#preprocessor bait-and-switch: max_entries 200,log
#preprocessor bait-and-switch-ignorehosts: 192.168.1.0/24

# Done by IPTables.  Iptables assembles fragments when we use connection
#                    tracking; therefore, we don't have to use frag2
# preprocessor frag2

# Configure Flow tracking module
# -------------------------------
#
# The Flow tracking module is meant to start unifying the state keeping
# mechanisms of snort into a single place. Right now, only a portscan detector
# is implemented but in the long term,  many of the stateful subsystems of
# snort will be migrated over to becoming flow plugins. This must be enabled
# for flow-portscan to work correctly.
#
# See README.flow for additional information
#

preprocessor flow: stats_interval 0 hash 2

# stream4: stateful inspection/stream reassembly for Snort
#----------------------------------------------------------------------
# Use in concert with the -z [all|est] command line switch to defeat stick/snot
# against TCP rules.  Also performs full TCP stream reassembly, stateful
# inspection of TCP streams, etc.  Can statefully detect various portscan
# types, fingerprinting, ECN, etc.

# stateful inspection directive
# no arguments loads the defaults (timeout 30, memcap 8388608)
# options (options are comma delimited):
#   detect_scans - stream4 will detect stealth portscans and generate alerts
#                  when it sees them when this option is set
#   detect_state_problems - detect TCP state problems, this tends to be very
#                           noisy because there are a lot of crappy ip stack
#                           implementations out there
#
#   disable_evasion_alerts - turn off the possibly noisy mitigation of
#                            overlapping sequences.
#
#
#   min_ttl [number]       - set a minium ttl that snort will accept to
#                            stream reassembly
#
#   ttl_limit [number]     - differential of the initial ttl on a session versus
#                             the normal that someone may be playing games.
#                             Routing flap may cause lots of false positives.
# 
#   keepstats [machine|binary] - keep session statistics, add "machine" to 
#                         get them in a flat format for machine reading, add
#                         "binary" to get them in a unified binary output 
#                         format
#   noinspect - turn off stateful inspection only
#   timeout [number] - set the session timeout counter to [number] seconds,
#                      default is 30 seconds
#   memcap [number] - limit stream4 memory usage to [number] bytes
#   log_flushed_streams - if an event is detected on a stream this option will
#                         cause all packets that are stored in the stream4
#                         packet buffers to be flushed to disk.  This only 
#                         works when logging in pcap mode!
#
#   stream4inline - This forces stream4 to do packet reassembly on a sliding window, what this means
#   is that we are doing reassembly in real-time, and no more of this postmortem uberpacket
#   creation alert but can't drop non-sense.  Be careful though we are performing
#   session drops so this means that this option has to be used in conjunction with enforce_state
#   to be effective otherwise what is the point. We are pretty sure we break the replace keyword
#   with this one, so be careful.
#
#    Stream4inline options:
#        truncate: truncates a stream instead of flushing it. Use this for the sliding window.
#        truncate_percentage: set the percentage to cut off of the stream when we truncate (default 33).
#        window_size: size in bytes of the sliding window (default: 7000).

#
# Stream4 uses Generator ID 111 and uses the following SIDS 
# for that GID:
#  SID     Event description
# -----   -------------------
#   1       Stealth activity
#   2       Evasive RST packet
#   3       Evasive TCP packet retransmission
#   4       TCP Window violation
#   5       Data on SYN packet
#   6       Stealth scan: full XMAS
#   7       Stealth scan: SYN-ACK-PSH-URG
#   8       Stealth scan: FIN scan
#   9       Stealth scan: NULL scan
#   10      Stealth scan: NMAP XMAS scan
#   11      Stealth scan: Vecna scan
#   12      Stealth scan: NMAP fingerprint scan stateful detect
#   13      Stealth scan: SYN-FIN scan
#   14      TCP forward overlap

#preprocessor stream4: disable_evasion_alerts

#Stream4 with inline support example
#
preprocessor stream4: disable_evasion_alerts, stream4inline, \
                      enforce_state, memcap 134217728, timeout 3600, \
                      truncate, window_size 4000
#
# tcp stream reassembly directive
# no arguments loads the default configuration 
#   Only reassemble the client,
#   Only reassemble the default list of ports (See below),  
#   Give alerts for "bad" streams
#
# Available options (comma delimited):
#   clientonly - reassemble traffic for the client side of a connection only
#   serveronly - reassemble traffic for the server side of a connection only
#   both - reassemble both sides of a session
#   noalerts - turn off alerts from the stream reassembly stage of stream4
#   ports [list] - use the space separated list of ports in [list], "all" 
#                  will turn on reassembly for all ports, "default" will turn
#                  on reassembly for ports 21, 23, 25, 53, 80, 143, 110, 111
#                  and 513

preprocessor stream4_reassemble: both

# ClamAV virusscanning preprocessor
#
# This preprocessor will scan the data in the packets for virusses.
# See README.clamav for details and limitations.
#
# Available options (comma delimited):
#
#   ports: a space delimited list of ports that will be scanned.
#     all: all ports
#     n  : single port to be scanned
#     !n : not scan port n (to be used with 'all')
#
#   toclientonly: scan only the traffic to the client (tcp only)
#   toserveronly: scan only the traffic to the server (tcp only)
#
#   action-drop : drop the infected packet (snort_inline only)
#   action-reset: reset the connection (snort_inline only)
#
#   dbdir: path to the clamav definitions directory.
#
#   dbreload-time: time in seconds to refresh the read of the AV signatures
#
#   file-descriptor-mode: writes packetbuffer to a temp file for scanning we suggest you use tmpfs for this *Experimental*
#
#   descriptor-temp-dir: used only in conjunction with file-descriptor-mode sets the directory where we write the packet 
#   buffer for scanning of viri.  Defaults to /tmp once again MOUNT a tmpfs file system as not to kill performance.
#
# Example:
# preprocessor clamav: ports all !22 !443, toclientonly, dbdir /usr/share/clamav, dbreload-time 43200, file-descriptor-mode
#


preprocessor http_inspect: global \
     iis_unicode_map unicode.map 1252

preprocessor http_inspect_server: server default \
    profile all ports { 80 8080 3128 } oversize_dir_length 500 flow_depth 0

# rpc_decode: normalize RPC traffic
# ---------------------------------
# RPC may be sent in alternate encodings besides the usual 4-byte encoding
# that is used by default. This plugin takes the port numbers that RPC
# services are running on as arguments - it is assumed that the given ports
# are actually running this type of service. If not, change the ports or turn
# it off.
# The RPC decode preprocessor uses generator ID 106
#
# arguments: space separated list
# alert_fragments - alert on any rpc fragmented TCP data
# no_alert_multiple_requests - don't alert when >1 rpc query is in a packet
# no_alert_large_fragments - don't alert when the fragmented
#                            sizes exceed the current packet size
# no_alert_incomplete - don't alert when a single segment
#                       exceeds the current packet size

preprocessor rpc_decode: 111 32771

# bo: Back Orifice detector
# -------------------------
# Detects Back Orifice traffic on the network.  Takes no arguments in 2.0.
# 
# The Back Orifice detector uses Generator ID 105 and uses the 
# following SIDS for that GID:
#  SID     Event description
# -----   -------------------
#   1       Back Orifice traffic detected

preprocessor bo

# telnet_decode: Telnet negotiation string normalizer
# ---------------------------------------------------
# This preprocessor "normalizes" telnet negotiation strings from telnet and ftp
# traffic.  It works in much the same way as the http_decode preprocessor,
# searching for traffic that breaks up the normal data stream of a protocol and
# replacing it with a normalized representation of that traffic so that the
# "content" pattern matching keyword can work without requiring modifications.
# This preprocessor requires no arguments.
# Portscan uses Generator ID 109 and does not generate any SID currently.

preprocessor telnet_decode

# sfPortscan
# ----------
# Author: Dan Roelker
# Portscan detection module.  Detects various types of portscans and
# portsweeps.  For more information on detection philosophy, alert types,
# and detailed portscan information, please refer to the README.sfportscan.
#
# -configuration options-
#     proto { tcp udp icmp ip_proto all }
#       The arguments to the proto option are the types of protocol scans that
#       the user wants to detect.  Arguments should be separated by spaces and
#       not commas.
#     scan_type { portscan portsweep decoy_portscan distributed_portscan all }
#       The arguments to the scan_type option are the scan types that the
#       user wants to detect.  Arguments should be separated by spaces and not
#       commas.
#     sense_level { low|medium|high }
#       There is only one argument to this option and it is the level of
#       sensitivity in which to detect portscans.  The 'low' sensitivity
#       detects scans by the common method of looking for response errors, such
#       as TCP RSTs or ICMP unreachables.  This level requires the least
#       tuning.  The 'medium' sensitivity level detects portscans and
#       filtered portscans (portscans that receive no response).  This
#       sensitivity level usually requires tuning out scan events from NATed
#       IPs, DNS cache servers, etc.  The 'high' sensitivity level has
#       lower thresholds for portscan detection and a longer time window than
#       the 'medium' sensitivity level.  Requires more tuning and may be noisy
#       on very active networks.  However, this sensitivity levels catches the
#       most scans.
#     memcap { positive integer }
#       The maximum number of bytes to allocate for portscan detection.  The
#       higher this number the more nodes that can be tracked.
#     logfile { filename }
#       This option specifies the file to log portscan and detailed portscan
#       values to.  If there is not a leading /, then snort logs to the
#       configured log directory.  Refer to README.sfportscan for details on
#       the logged values in the logfile.
#     watch_ip { Snort IP List }
#     ignore_scanners { Snort IP List }
#     ignore_scanned { Snort IP List }
#       These options take a snort IP list as the argument.  The 'watch_ip'
#       option specifies the IP(s) to watch for portscan.  The
#       'ignore_scanners' option specifies the IP(s) to ignore as scanners.
#       Note that these hosts are still watched as scanned hosts.  The
#       'ignore_scanners' option is used to tune alerts from very active
#       hosts such as NAT, nessus hosts, etc.  The 'ignore_scanned' option
#       specifies the IP(s) to ignore as scanned hosts.  Note that these hosts
#       are still watched as scanner hosts.  The 'ignore_scanned' option is
#       used to tune alerts from very active hosts such as syslog servers, etc.
#
preprocessor sfportscan: proto  { all } \
                         memcap { 10000000 } \
                         sense_level { low } \
			 ignore_scanners { [192.168.0.64/28] }

# Performance Statistics
# ----------------------
# Documentation for this is provided in the Snort Manual.  You should read it.
# It is included in the release distribution as doc/snort_manual.pdf
#
# preprocessor perfmonitor: time 300 file /var/snort/snort.stats pktcnt 10000

### Logging alerts of outbound attacks                                          
#output alert_full: snort_inline-full                                       
#output alert_fast: snort_inline-fast
output alert_prelude:profile=snort

### If you want to log the contents of the dropped packets, remove comment
#output log_tcpdump: tcpdump.log

# Include classification & priority settings
include $RULE_PATH/classification.config
include $RULE_PATH/reference.config

### The Drop Rules
# Enabled
include $RULE_PATH/exploit.rules
include $RULE_PATH/finger.rules
include $RULE_PATH/ftp.rules
include $RULE_PATH/telnet.rules
include $RULE_PATH/rpc.rules
include $RULE_PATH/rservices.rules
include $RULE_PATH/dos.rules
include $RULE_PATH/ddos.rules
include $RULE_PATH/dns.rules
include $RULE_PATH/tftp.rules
include $RULE_PATH/web-cgi.rules
include $RULE_PATH/web-coldfusion.rules
include $RULE_PATH/web-iis.rules
include $RULE_PATH/web-frontpage.rules
include $RULE_PATH/web-misc.rules
include $RULE_PATH/web-client.rules
include $RULE_PATH/web-php.rules
include $RULE_PATH/sql.rules
include $RULE_PATH/x11.rules
include $RULE_PATH/icmp.rules
include $RULE_PATH/netbios.rules
include $RULE_PATH/oracle.rules
include $RULE_PATH/mysql.rules
include $RULE_PATH/snmp.rules
include $RULE_PATH/smtp.rules
include $RULE_PATH/imap.rules
include $RULE_PATH/pop3.rules
include $RULE_PATH/pop2.rules
include $RULE_PATH/web-attacks.rules
include $RULE_PATH/virus.rules
include $RULE_PATH/nntp.rules

### Disabled

# include $RULE_PATH/other-ids.rules
# include $RULE_PATH/backdoor.rules
# include $RULE_PATH/shellcode.rules
# include $RULE_PATH/policy.rules
# include $RULE_PATH/porn.rules
# include $RULE_PATH/info.rules
# include $RULE_PATH/icmp-info.rules
# include $RULE_PATH/chat.rules
# include $RULE_PATH/multimedia.rules
# include $RULE_PATH/p2p.rules
include $RULE_PATH/local.rules

# Bleeding snort
include $BLEEDING_RULE_PATH/bleeding.conf
include $BLEEDING_RULE_PATH/bleeding.rules
include $BLEEDING_RULE_PATH/bleeding-attack_response.rules
include $BLEEDING_RULE_PATH/bleeding-dos.rules
#include $BLEEDING_RULE_PATH/bleeding-drop-BLOCK.rules
#include $BLEEDING_RULE_PATH/bleeding-drop.rules
#include $BLEEDING_RULE_PATH/bleeding-dshield-BLOCK.rules
#include $BLEEDING_RULE_PATH/bleeding-dshield.rules
include $BLEEDING_RULE_PATH/bleeding-exploit.rules
include $BLEEDING_RULE_PATH/bleeding-malware.rules
include $BLEEDING_RULE_PATH/bleeding-scan.rules
include $BLEEDING_RULE_PATH/bleeding-virus.rules
include $BLEEDING_RULE_PATH/bleeding-web.rules
include $BLEEDING_RULE_PATH/local.rules


